High Head Slurry Pump,wear resistant high head slurry pumpfeature:
a) Adopts horizontal, vertical axis medium open type double pump shell structure, lining for cemented carbide or
rubber has good wear-resisting, corrosion resistance and high reliability
b) High efficiency hard alloy , and low NPSH
c) To meet the different operation conditions , adopted the brief type structure bearing parts , selected high bearing
capacity design , alloy bearing grease lubrication oil .
d) Through adjusting the clearance between protection board and impeller , ensuring the pump efficient operation
e) Using packing seal, impeller sealing , container type mechanical seal to adapt to different operating mode
requirement
f) Pump and drive can choose straight league transmission, triangle, hydraulic transmission device coupled
transmission, reducer drive
g) The outflow direction can be installed by eight Angle rotation to adapt to different site installation conditions
h) Available to use multipole series ,to satisfy the long-distance transmission requirements
The structure of our 6 inch high head Slurry Pump,HH High Head Slurry Pump, Horizontal Slurry Pump
Application of Centrifugal Slurry Pump,Naipu high head slurry pump,slurry pump
This high head slurry pump is suitable for conveying high abrasive slurries in the applications of low head and small amount of flow .Yet at the high head and large amount of flow area,it is applied to the conveyance of low abrasive slurries .Available in muti stage series application ,this product is commonly used to transport the abrasive and high concentration slurries in metallurgy,mining ,coal ,electric power,building materials and other related industrial departments .
The parameter of 6 inch high head slurry pump, horizontal slurry pump, high head slurry pump,slurry pump
Type | Allowable Mating Max. Power(Kw) | Clear Water Performance | Impeller |
Capacity/Q cubic meters/hr | Head/m | Speed/rpm | Max Efficiency/% | NPSH/m | Nos of Vane | Impeller Diameter/mm |
1.5X1C-HH | 30 | 16.2--34.2 | 25-92 | 1400--2200 | 20 | 2--5.5 | 5 | 330 |
3X2D-HH | 60 | 68.4--136.8 | 25-87 | 850--1400 | 47 | 3-7.5 | 5 | 457 |
4X3E-HH | 120 | 126-252 | 12-97 | 600-1400 | 50 | 2-5 | 5 | 508 |
6X4F-HH | 560 | 324-720 | 30-118 | 600-1000 | 64 | 3-8 | 5 | 711 |
8X6S-HH | 560 | 468-1008 | 20-94 | 500--1000 | 65 | 4-12 | 5 | 711 |
Material of HH high head slurry pump, slurry pump, horizontal Slurry Pump Parts:
Spare parts of our AH,HH and SP horizontal and Vertical Slurry Pump:
4/3 high head horizontal slurry pump,4/3HH high head Mining Pump,High head metal liner slurry pump contact information in Shijiazhuang Naipu Pump Co.,ltd.