high chrome slurry pump

6/4D Centrifugal Slurry Pumps SPECIFICATIONS: Size: 6" x 4" Capacity: 144-720m3/h Head: 12-118m Speed: 600-1550rpm NPSHr: 3-8m Eff.: 65% Power: Max.260kw Handling solids: 57mm Seal arrangement: Packing seal, Expeller seal, Mechanical seal Materials: High chrome alloy, Rubber, polyurethane etc Slurry Pumps Design Features: Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. Liners - Common material hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer seal rings back all liner joints. Easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Impeller - Common material hard metal and molded elastomer impellers are completely interchangeable. Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Throat bush - Common material hard metal and molded elastomer impellers are completely interchangeable. Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal. Pump casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. One-piece frame - A very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance. 6/4E slurry pump, 4/3D slurry pumps, 4/3E slurry pump, 8/6E centrifugal slurry pumps, 8/6F centrifugal slurry pumps, 1.5/1B horizontal slurry pumps, 2/1.5B horizontal slurry pumps, 3/2C slurry pumps, 4/3D slurry pumps, 12/10ST slurry pump, 16/14TU slurry pumps

2024/01/12