Mining Tailings Pump. The 'SPR' range is vertical cantilevered shaft design similar to the 'SP', but features full elastomer protection on all Submerged components. This allows this pump to be used in highly corrosive applications. Available in sizes ranging from 40mm through to 150mm.
Submerged depth: 0.9 m, 1.2 m, 1.5 m, 1.8 m...
SPR vertical Slurry Pump is one type of vertical slurry pump with rubber liners, the rubber material can be natural rubber or elastomer rubbber.
6 Inches Sump Pump, R55 Vertical Mining Pump, Spr Rubber Vertical Slurry Pump, Mining Sump Pump, Slurry Sump Pump.
6 Inches Sump Pump Wear/ Erosion Resistant Material
Various requirement for materials in the market, Naipu offering wet end part material as following. Metal A05, A07, A12, A33, A49, A61 and etc. Rubber R08, R26, R33, R55, S01, S21, S31, S42 and etc. Special materail: U01, EPDM, PU, CR, Hastelloy 276-C, Ferralium and etc.
Type | Allowable Max. Power | Range Of Performance | Impeller |
(Kw) | Capacity | Head | Speed | Max Efficiency | No. of Vanes | Diameter |
| M3/hr | L/S | m | rpm | % | mm |
40 PV-SP | 15 | 19.44-43.2 | 5.4-12 | 4.5-28.5 | 1000-2200 | 40 | 5 | 188 |
65 QV-SP | 30 | 23.4-111 | 6.5-30.8 | 5-29.5 | 700-1500 | 50 | 5 | 280 |
100 RV-SP | 75 | 54-289 | 15-80.3 | 5-35 | 500-1200 | 56 | 5 | 370 |
150 SV-SP | 110 | 108-479.16 | 30-133.1 | 8.5-40 | 500-1000 | 52 | 5 | 450 |
200 SV-SP | 110 | 189-891 | 152.5-247.5 | 6.5-37 | 400-850 | 64 | 5 | 520 |
250 TV-SP | 200 | 261-1089 | 72.5-302.5 | 7.5-33.5 | 400-750 | 60 | 5 | 575 |
300 TV-SP | 200 | 288-1267 | 80-352 | 6.5-33 | 350-700 | 50 | 5 | 610 |
40 PV-SPR | 15 | 17.28-39.6 | 4.8-11 | 4--26 | 1000-2200 | 40 | 5 | 188 |
65 QV-SPR | 30 | 22.5-105 | 6.25-29.15 | 5.5-30.5 | 700-1500 | 51 | 5 | 280 |
100 RV-SPR | 75 | 64.8-285 | 18-79.2 | 7.5-36 | 600-1200 | 62 | 5 | 370 |
SPR Slurry Pump PartS
1. Discharge Pipe 2. Column 3. Strainer 4. Back Liner | 5. Impeller 6. Pump Casing 7. Lower Strainer |
R55 Vertical Mining Pump Part Code No.: SVR15073J, SVR15073L, SVR15073N, SPR15092R55, SPR15206R55, SPR15041R55, SVR15116L, SVR15019-1...
Naipu Slurry Pump Service
1. OEM service: Produce the pump and spare parts according to client's drawing or sample.
2. Selection service: Help customers select the type, size and operating speed of pumps that will perform at the lowest cost.
3. Using service: Offer Design, Installation, Repair and Maintenance solutions and Mine measuring up service.
4. Material service: Interchangeable metal design allow best material choice for any application.
5. After-sale service: Provide lifetime after sale service to solve any question during uses and large stock for standard spare parts.
Any question please contact Katherine Hou freely.