3 inch High Head Slurry Pumps
Features:
• High head, high pressure centrifugal end suction Slurry Pump design.
• Ductile iron fully lined casing provides durability, strength and long service life.
• Hyper wear resistance materials for longtime worklife.
• Multi-stage high pressure operation allowed.
• Heavy duty construction with through-bolt design provides ease of maintenance and results in less down time
• Large diameter, slow turning, high efficiency impellers result in maximum wear life and lower operating costs
• Large, open internal passages maximize wear life and lower operating costs
• Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs.
Pump Model Selection of NHH Pump
When the type selection is conducted, the performance curve table for clear water of a pump shall be referred to, and the coefficient of range for the flow selected is as follows:
-- For slurry of medium density and strong abrasiveness, the coefficient of flow range will be 40-80%;
-- For slurry of low density and strong abrasiveness, the coefficient of flow range will be 40-100%;
-- For the highest efficiency point under a certain RPM condition, its corresponding flow rate will be 100%.
NP-HH Pump Performance Parameters
NP-HH Slurry Pump Performance Parameters |
Type | Allowable Mating Max. Power(Kw) | | Clear Water Performance | Impeller |
Material | Capacity/Q m³/hr | Head/m | Speed | Max Eff% | NPSH/m | Nos of Vane | Impeller Diameter/ |
rpm | mm |
1.5/1NP-HH | 30 | Metal | 16.2-34.2 | 25-92 | 1400-2200 | 20 | 2-5.5 | 5 | 330 |
3/2NP-HH | 60 | Metal | 68.4-136.8 | 25-87 | 850-1400 | 47 | 3-7.5 | 5 | 457 |
4/3NP-HH | 120 | Metal | 126-252 | 12-97 | 600-1400 | 50 | 2--5 | 5 | 508 |
6/4NP-HH | 560 | Metal | 324-720 | 30-118 | 600-1000 | 64 | 3--8 | 5 | 711 |
8/6NP-HH | 560 | Metal | 468-1008 | 20-94 | 500-1000 | 65 | 4--12 | 5 | 711 |
NAIPU Main Pump Models
Naipu Workshop
SHIJIAZHUANG NAIPU PUMP CO.,LTD is a Factory of Slurry Pumps,Sand Gravel Pumps,Dredging Pumps etc.
Our Pumps are 100% interchangeable with AH HH SP AF L M S.For special parts and special material,we can do OEM service.
We have Mould Workshop,Casting Workshop,Machining Workshop,Assembly Workshop,Test Workshop etc.One Dragon Service.
Welcome to Visit Our Factory !