SHIJIAZHUANG NAIPU produced many types of high chrome and rubber slurry pumps and spare parts, and we also accept OEM Orders for high chrome and rubber spare parts, and slurry pumps. We have experienced engineers in design and improve all types of slurry pumps, mud pumps, if you have any special request, welcome to contact with me.
Features of Horizontal Slurry Pumps: model 3/2C-AHZJ mining slurry pumps
1. Bearing Assembly- large diameter shaft with short overhang contributes to long bearing life.
2. Liners – easily replaceable liners are bolted, not glued to the casing for positive maintenance.
3. Casing – casing halves of cast or ductile iron provide high operating pressure capabilities.
4. Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
5. Throat bush – wear is reduced and maintenance simplified by the use of tapered 1.
Parameters of horizontal slurry pumps, model 3/2C-AHZJ slurry pumps
Model | Max. Power (kw) | Materials | Clear Water Performance | Impeller Vane No. |
Liner | Impeller | Capacity Q (m3/h) | Head H (m) | Speed n (rpm) | Eff. η (%) | NPSH (m) |
1.5/1B-AHZJ | 15 | M | M | 12.6~28.8 | 6~68 | 1200~3800 | 40 | 2~4 | 5 |
RU | RU | 10.8~25.2 | 7~52 | 1400~3400 | 35 | 3 |
2/1.5B-AHZJ | 15 | M | M | 32.4~72 | 6~58 | 1200~3200 | 45 | 3.5~8 | 5 |
RU | RU | 25.2~54 | 5.5~41 | 1000~2600 | 50 | 2.5~5 |
3/2C-AHZJ | 30 | M | M | 39.6~86.4 | 12~64 | 1300~2700 | 55 | 4~6 | 5 |
RU | RU | 36~75.6 | 13~39 | 1300~2100 | 60 | 2~4 |
4/3C-AHZJ | 30 | M | M | 86.4~198 | 9~52 | 1000~2200 | 71 | 4~6 | 5 |
RU | RU | 79.2~180 | 5~34.5 | 800~1800 | 59 | 3~5 | 5 |
4/3D-AHZJ | 60 | M | M | 97.2~198 | 9~53 | 1000~2200 | 71 | 4~6 | 5 |
RU | RU | 79.2~180 | 5~34.5 | 800~1800 | 59 | 3~5 | 5 |
6/4D-AHZJ | 60 | M | M | 162~360 | 12~56 | 800~1550 | 65 | 5~8 | 5 |
RU | RU | 144~324 | 12~45 | 800~1350 | 65 | 3~5 | 5 |
6/4E-AHZJ | 120 | M | M | 162~360 | 12~56 | 800~1550 | 65 | 5~8 | 5 |
RU | RU | 144~324 | 12~45 | 800~1350 | 65 | 3~5 | 5 |
8/6E-AHZJ | 120 | M | M | 360~828 | 10~61 | 500~1140 | 72 | 2~9 | 5 |
RU | RU | 324~720 | 7~49 | 400~1000 | 65 | 5~10 | 5 |
8/6R-AHZJ | 300 | M | M | 360~828 | 10~61 | 500~1140 | 72 | 2~9 | 5 |
RU | RU | 324~720 | 7~49 | 400~1000 | 65 | 5~10 | 5 |
10/8-AHZJ | 560 | M | M | 612~1368 | 11~61 | 400~850 | 71 | 4~10 | 5 |
RU | RU | 540~1188 | 12~50 | 400~750 | 75 | 4~12 |
10/8E-MZJ | 120 | M | M | 666~1440 | 14~60 | 600~1100 | 73 | 4~10 | 5 |
RU | RU | 540~1188 | 10~42 | 500~900 | 79 | 5~9 | 5 |
12/10-AHZJ | 560 | M | M | 936~1980 | 7~68 | 300~800 | 82 | 6 | 5 |
RU | RU | 720~1620 | 7~45 | 300~650 | 80 | 2.5~7.5 |
14/12-AHZJ | 560 | M | M | 1260~2772 | 13~63 | 300~600 | 77 | 3~10 | 5 |
RU | RU | 1152~2520 | 13~44 | 300~500 | 79 | 3~8 | 5 |
16/14-AHZJ | 560 | M | M | 1368~3060 | 11~63 | 250~550 | 79 | 4~10 | 5 |
16/14-AHZJ | 1200 |
18/16-AHZJ | 1200 | M | M | 2160~5040 | 8~66 | 200~500 | 80 | 4.5~9 | 5 |
20/18-AHZJ | 1200 | M | M | 2520~5400 | 13~57 | 200~400 | 85 | 5~10 |
Pictures of horizontal slurry pumps
Parts material of Mining Slurry Pump ( Coarse Tailings Slurry Pumps/fine tailings Slurry Pump, mining flotation slurry pump):
1.Impeller,cover plate liner,FPL insert:high chrome.
2.Frame plate and pump cover:HT200 or QT500-7.
3.Expeller and expeller ring:gray iron or high chrome.
4.Frame,stuffing box and gland assembly:HT200.
5.Intake joint and discharge joint: natural rubber.
6.O-ring:butadiene-acrylonitrile rubber;
7.Sealing ring:butyl rubber.
8.Shaft sleeve and shaft spacer:3Cr13;
9.Lantern ring:1Cr18Ni9Ti.
Construction features of Coarse Tailings Slurry Pumps/fine tailings slurry pump, mining flotation slurry pump
Select chart of Slurry pumps, horizontal slurry pumps, mining slurry pumps, centrifugal pumps.
Production process of Coarse Tailings Slurry Pumps/fine tailings slurry pump, mining flotation slurry pump
OEM Slurry Pump And Parts:
AH Coarse Tailings Slurry Pumps/fine tailings slurry pump, AH mining flotation slurry pump