Naipu 6/4HH Pump HF4083A05 Metal Throatbush
Main Slurry Pump Parts : Impeller , Volute Liner , Casing , ThroatBush, Frame Plate Liner Insert , Cover Plate , Frame Plate, Pump Liner Expeller , Expeller Ring ,Stuffing Box , Expeller , Pump Shaft , shaft sleeve, Shaft Spacer, Bearing Assembly , Base, Stuffing Box, Gland Assembly, Bearing Housing , Lantern Ring , pump discharge pipe , flange , and so on.
HH Slurry Pump Throatbush / Slurry Pump A05 Liner
Throatbush Code | HA Slurry Pump | Materials |
E4083 | 6/4D, 6/4E | High chrome, Natural rubber, Polyurethane |
F6083 | 8/6E, 8/6F | High chrome, Natural rubber, Polyurethane |
G8083 | 10/8F, 10/8ST | High chrome, Natural rubber, Polyurethane |
G10083 | 12/10ST | High chrome, Natural rubber, Polyurethane |
G12083 | 14/12ST | High chrome, Natural rubber, Polyurethane |
H14083 | 16/14TU | High chrome, Natural rubber, Polyurethane |
Throatbush Code | HH Slurry Pump | Materials |
DH2083 | 3/2D-HH | High chrome, Polyurethane |
DH3083 | 4/3E-HH | High chrome, Polyurethane |
FH4083 | 6/4F-HH | High chrome, Polyurethane |
Throatbush Code | G(H) Gravel Pump | Materials |
GG1412013-1 | 12/10G-G | High chrome |
GGH10013 | 12/10G-GH | High chrome |
FGH8013 | 10/8S-GH | High chrome |
HG14130M | 16/14TU-GH | High chrome |
Slurry Pump Metal Parts / HH Pump Parts
Metal Material
Code | Material # | Hardness HRC | Performance | Application |
A05 | KmTBCr26 | ≥56 | Ranks second only to A07 in abrasion-resistant performance; fair corrosion-resistant performance. | High impact load abrasion condition; PH rate ranging from 5 to 12 |
A07 | KmTBCr15Mo3 | ≥59 | Best abrasion-resistant performance; corrosion-resistant performance is inferior to A05 | High impact load abrasion condition |
A33 | | ≥35 | Abrasion-resistant performance is close to A03; fair corrosion-resistant performance | Oxide slurry with PH rate no less than 1, like phosphor-gypsum in phosphate fertilizer plant, nitric acid, sulph-oacid and phosphoric acid, etc. |
A49 | | ≥43 | Fair abrasion-resistant performance, close to A03; fair corrosion-resistant performance in media with lower PH rate. | Corrosion conditions with low PH rate, especially for flue gas and FGD devices for media of PH≥4; general suitable for lower acid condition. |
A12 | | ≥62 | Higher abrasion-resistant performance than A05; fair corrosion-resistant performance; suitable for media with PH rate is 6-16, where A05 is not suitable. | High abrasive slurry with fine particles. |
A61 | | 63-68 | Optimized abrasion-resistant performance than A12 | High abrasive slurry with fine particles. |
Horizontal Slurry Pump with Rubber and Metal Liner. High quality slurry pump, OEM Centrifugal Slurry Pumps, Slurry Pump Volute Liner E4110EP, Hastelloy Pump Parts, Wear Resistant Polyurethane Parts,OEM A05 High Chrome Impellers.
Naipu Main Pump Model: NAH series | L(R) ,M | HH | SP(R) | G | AF Series |
1.5/1B-NAH(R) | 20A-L | 1.5/1 C-HH | 40PV-SP(R) | 6/4D-G | 2QV-AF |
2/1.5B-NAH(R) | 50B-L(R) | 3/2D-HH | 65QV-SP(R) | 8/6E-G | 3QV-AF |
3/2C-NAH(R) | 75C-L | 4/3E-HH | 100RV-SP(R) | 10/8F-G | 6SV-AF |
4/3C-NAH(R) | 100 D-L | 4/3X-HH | 150SV-SP(R) | 10/8S-G | 8SV-AF |
6/4D-NAH(R) | 150E-L | 6/4F-HH | 200SV-SP | 12/10G-G | 2AHF |
6/4E-NAH(R) | 300S-L | 6/4X-HH | 250TV-SP | 14/12G-G | 3AHF |
8/6E-NAH(R) | 10/8 R-M | 6S-H | | 14/12T-G | 4AHF |
8/6R-NAH(R) | 10/8 E-M | 8/6S-H | | 16/14 G-G | 6AHF |
10/8F-NAH(R) | 12/10F-M | 8/6X-H | | 16/14TU-GH | |
10/8X-NAH(R) | | 6S-HP | | 16/14H-GH | |
12/10ST-NAH(R) | | 8/6S-HP | | 18/16G-G | |
14/12ST-NAH(R) | | 8/6X-HP | | 18/16 TU-GH | |
16/14TU-NAH(R) | | | | | |
20/18G(TU)-NAH(R) | | | | | |
Any question please contact Katherine Hou freely.
+8615028111051
Disclaimer: Warman, Goulds and Metso and others are the brand names of the respected owners. Any use of competitor names, trademarks, model numbers or part numbers by NaiPu Pump are for reference purpose only and do not imply that any part or pump listed is the product of Weir Warman Pumps, ITT Goulds Pumps and Metso Pumps.