Horizontal AHF froth pumps / HA froth Slurry Pump Design Features:
NAHF Horizontal Froth Pump Impeller | NAHF Horizontal Froth Pump Throatbush |
CAHF2056QU1A05 DAHF3056QU1A05 EAHF4056QU1A05 FAHF6056QU1A05 FAHF8056QU1A05 STAHF10056QU1A05 | CAHF2083A05 DAHF3083A05 EAHF4083A05 FAHF6083A05 FAHF8083A05 STAHF10083A05 |
2 inches froth pump
EAHF4083R
FAHF6083R
EAHF4056QU1A05
FAHF6956QU1A05
EAHF4060
DAHF3110
DAHF3056QU1A05
CAM3041HS1
E4041HS1
F6041HS1
• Heavy duty construction with through-bolt design provides ease of maintenance and less down time.
• Ductile iron fully lined casing provides durability, strength and long service life.
• Large diameter, slow turning, high efficiency impellers maximize wear life and lower TOC.
• Large, open internal passages reduce internal velocities maximizing wear life resulting in lower operating costs.
• Unique impeller design for most difficult froth applications.
• Thick elastomer or metal bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and inter mixability to reduce over all maintenance costs and maximize wear life.
• Minimal shaft/impeller overhang reduces shaft deflection and increases packing life.
• Cartridge-style Bearing Assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life.
• Standard NAH can be converted by replacing cover plate, throat bush and impeller.
• Full flush, low flow or dry running centrifugal seals minimize water usage and operating costs.
Horizontal Slurry Pump with wide range of erosive and corrosive applications.
A49 Slurry Pump is suitable for low pH corrosion duties, where erosive wear is also a problem. The alloy is particularly suitable for Flue Gas Desulphu-rization(FGD) and other corrosive applications, where the pH is less than 4. The alloy can also be used in other mildly acidic environments. A49 has an erosion resistance similar to that of Ni-Hard 1.
NP-AHF Horizontal Slurry Pump Performancce Parameters
Type | Capacity /L/S | Clear Water Performance | | |
Capacity /m³/hr | Head /m | Speed/rpm | Blades No. | Inlet diameter /mm | Inlet diameter /mm | Diameter /mm |
2AHF-C | 5.6-16.9 | 20.2-61 | 13-26.2 | 1300-1800 | 4 | 135 | 5 | 152 | |
3AHF-C | 9.8-33.3 | 35.5-120 | 9.8-24 | 1000-1500 | 4 | 180 | 5 | 184 | |
4AHF-D | 21.2-69.4 | 76.4-250 | 11.1-30 | 700-1100 | 4 | 280 | 5 | 510 | |
6AHF-E | 58.3-147.2 | 210-530 | 17.4-40 | 600-800 | 4 | 350 | 5 | 1067 | |
Contact Information: Katherine Hou
katherine at naipump dot com