40PVSPR Rubber Lined Mining Sump Pump
Spr Rubber Vertical Slurry Pump Materials - Pumps can be manufactured in abrasive and corrosive resistant materials.
Small Sump Pump Discharge Pipe - Metal for SP; elastomer covered for SPR. All wetted metal parts are completely rust protected.
Low Pressure Slurry Pump Lower Strainer - Bolted metal or polyurethane for SP; moulded snap-on elastomer for SPR.
Open Impeller Sump Pump Impeller - Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for aximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers
are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.
Rubber Sump Pump Agitation - An external agitator spray connection arrangement can be fitted to the pump as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye.
SP type rubber vertical slurry pump with rubber liners, slurry pump, Vertical pump, vertical slurry pump, Centrifugal Pump, Centrifugal Slurry Pump, Vertical Sump Pump, 40PV rubbber slurry pump, 65Qv Rubber Vertial Pump, 100Rv Rubber Slurry Pump, vertical rubber pump, vertical Mining Slurry Pump, SPR vertical slurry pump is one type of vertical slurry pump with rubber liners, the rubber material can be natural rubber or elastomer rubbber.
Various requirement for materials in the market, Naipu offering wet end part material as following. Metal A05, A07, A12, A33, A49, A61 and etc. Rubber R08, R26, R33, R55, S01, S21, S31, S42 and etc. Special materail: U01, EPDM, PU, CR, Hastelloy 276-C, Ferralium and etc.
SPR Vertical Slurry Pumps Performance Parameters
Type | Allowable Max. Power | Range Of Performance | Impeller |
(Kw) | Capacity | Head | Speed | Max Efficiency | No. of Vanes | Diameter |
| M3/hr | L/S | m | rpm | % | mm |
40 PV-SP | 15 | 19.44-43.2 | 5.4-12 | 4.5-28.5 | 1000-2200 | 40 | 5 | 188 |
65 QV-SP | 30 | 23.4-111 | 6.5-30.8 | 5-29.5 | 700-1500 | 50 | 5 | 280 |
100 RV-SP | 75 | 54-289 | 15-80.3 | 5-35 | 500-1200 | 56 | 5 | 370 |
150 SV-SP | 110 | 108-479.16 | 30-133.1 | 8.5-40 | 500-1000 | 52 | 5 | 450 |
200 SV-SP | 110 | 189-891 | 152.5-247.5 | 6.5-37 | 400-850 | 64 | 5 | 520 |
250 TV-SP | 200 | 261-1089 | 72.5-302.5 | 7.5-33.5 | 400-750 | 60 | 5 | 575 |
300 TV-SP | 200 | 288-1267 | 80-352 | 6.5-33 | 350-700 | 50 | 5 | 610 |
40 PV-SPR | 15 | 17.28-39.6 | 4.8-11 | 4--26 | 1000-2200 | 40 | 5 | 188 |
65 QV-SPR | 30 | 22.5-105 | 6.25-29.15 | 5.5-30.5 | 700-1500 | 51 | 5 | 280 |
100 RV-SPR | 75 | 64.8-285 | 18-79.2 | 7.5-36 | 600-1200 | 62 | 5 | 370 |
Rubber Vertical Slurry Pump Main Part Number at the Drawing
1. Discharge Pipe 2. Column 3. Strainer 4. Back Liner | 5. Impeller 6. Pump Casing 7. Lower Strainer |
Sump Pump Part Code No.: PVR4102(E-L), PVR4145, SPR4322, PVR4073, SPR4206R55, SPR4041R55, SPR4092R55...
Naipu Service
1. OEM service: Produce the pump and spare parts according to client's drawing or sample.
2. Selection service: Help customers select the type, size and operating speed of pumps that will perform at the lowest cost.
3. Using service: Offer Design, Installation, Repair and Maintenance solutions and Mine measuring up service.
4. Material service: Interchangeable metal design allow best material choice for any application.
5. After-sale service: Provide lifetime after sale service to solve any question during uses and large stock for standard spare parts.
Any question please contact Katherine Hou freely.