Features of Horizontal Slurry Pumps: model 8/6E-AHZJ mining slurry pumps, 8/6E-AHZJ horizontal slurry pumps, 8/6E-AHZJ Mineral processing slurry pumps produced from Naipu factory.
1. 8/6E-AHZH Slurry Pump Bearing Assembly- large diameter shaft with short overhang contributes to long bearing life.
2. 8/6E-AHZH Slurry pump Bearing assemblyLiners – easily replaceable liners are bolted, not glued to the casing for positive maintenance.
3. 8/6E-AHZH Slurry pump Bearing assemblyCasing – casing halves of cast or ductile iron provide high operating pressure capabilities.
4 8/6E-AHZH Slurry pump Bearing assembly Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
5. 8/6E-AHZH Slurry pump Bearing assemblyThroat bush – wear is reduced and maintenance simplified by the use of tapered 1.
Parameters of horizontal slurry pumps, model 4/3C-AHZJ slurry pumps
Model | Max. Power (kw) | Materials | Clear Water Performance | Impeller Vane No. |
Liner | Impeller | Capacity Q (m3/h) | Head H (m) | Speed n (rpm) | Eff. η (%) | NPSH (m) |
1.5/1B-AHZJ | 15 | M | M | 12.6~28.8 | 6~68 | 1200~3800 | 40 | 2~4 | 5 |
RU | RU | 10.8~25.2 | 7~52 | 1400~3400 | 35 | 3 |
2/1.5B-AHZJ | 15 | M | M | 32.4~72 | 6~58 | 1200~3200 | 45 | 3.5~8 | 5 |
RU | RU | 25.2~54 | 5.5~41 | 1000~2600 | 50 | 2.5~5 |
3/2C-AHZJ | 30 | M | M | 39.6~86.4 | 12~64 | 1300~2700 | 55 | 4~6 | 5 |
RU | RU | 36~75.6 | 13~39 | 1300~2100 | 60 | 2~4 |
4/3C-AHZJ | 30 | M | M | 86.4~198 | 9~52 | 1000~2200 | 71 | 4~6 | 5 |
RU | RU | 79.2~180 | 5~34.5 | 800~1800 | 59 | 3~5 | 5 |
4/3D-AHZJ | 60 | M | M | 97.2~198 | 9~53 | 1000~2200 | 71 | 4~6 | 5 |
RU | RU | 79.2~180 | 5~34.5 | 800~1800 | 59 | 3~5 | 5 |
6/4D-AHZJ | 60 | M | M | 162~360 | 12~56 | 800~1550 | 65 | 5~8 | 5 |
RU | RU | 144~324 | 12~45 | 800~1350 | 65 | 3~5 | 5 |
6/4E-AHZJ | 120 | M | M | 162~360 | 12~56 | 800~1550 | 65 | 5~8 | 5 |
RU | RU | 144~324 | 12~45 | 800~1350 | 65 | 3~5 | 5 |
8/6E-AHZJ | 120 | M | M | 360~828 | 10~61 | 500~1140 | 72 | 2~9 | 5 |
RU | RU | 324~720 | 7~49 | 400~1000 | 65 | 5~10 | 5 |
8/6R-AHZJ | 300 | M | M | 360~828 | 10~61 | 500~1140 | 72 | 2~9 | 5 |
RU | RU | 324~720 | 7~49 | 400~1000 | 65 | 5~10 | 5 |
10/8-AHZJ | 560 | M | M | 612~1368 | 11~61 | 400~850 | 71 | 4~10 | 5 |
RU | RU | 540~1188 | 12~50 | 400~750 | 75 | 4~12 |
10/8E-MZJ | 120 | M | M | 666~1440 | 14~60 | 600~1100 | 73 | 4~10 | 5 |
RU | RU | 540~1188 | 10~42 | 500~900 | 79 | 5~9 | 5 |
12/10-AHZJ | 560 | M | M | 936~1980 | 7~68 | 300~800 | 82 | 6 | 5 |
RU | RU | 720~1620 | 7~45 | 300~650 | 80 | 2.5~7.5 |
14/12-AHZJ | 560 | M | M | 1260~2772 | 13~63 | 300~600 | 77 | 3~10 | 5 |
RU | RU | 1152~2520 | 13~44 | 300~500 | 79 | 3~8 | 5 |
16/14-AHZJ | 560 | M | M | 1368~3060 | 11~63 | 250~550 | 79 | 4~10 | 5 |
16/14-AHZJ | 1200 |
18/16-AHZJ | 1200 | M | M | 2160~5040 | 8~66 | 200~500 | 80 | 4.5~9 | 5 |
20/18-AHZJ | 1200 | M | M | 2520~5400 | 13~57 | 200~400 | 85 | 5~10 |
Pictures of horizontal slurry pumps
Parts material of Mining Slurry Pump ( Coarse Tailings Slurry Pumps/fine tailings slurry pump, mining flotation slurry pump):
1.Impeller,cover plate liner,FPL insert:high chrome.
2.Frame plate and pump cover:HT200 or QT500-7.
3.Expeller and expeller ring:gray iron or high chrome.
4.Frame,stuffing box and gland assembly:HT200.
5.Intake joint and discharge joint: natural rubber.
6.O-ring:butadiene-acrylonitrile rubber;
7.Sealing ring:butyl rubber.
8.Shaft sleeve and shaft spacer:3Cr13;
9.Lantern ring:1Cr18Ni9Ti.
Construction features of Coarse Tailings Slurry Pumps/fine tailings slurry pump, mining flotation slurry pump
Select chart of Slurry pumps, horizontal slurry pumps, mining slurry pumps, centrifugal pumps.
Production process of Coarse Tailings Slurry Pumps/fine tailings slurry pump, mining flotation slurry pump
OEM Slurry Pump And Parts:
AH Coarse Tailings Slurry Pumps/fine tailings slurry pump, AH mining flotation slurry pump