slurry pumps made in Shijiazhuang Naipu

Horizontal Slurry Pump is a cantilever, horizontal double-casing  Centrifugal Slurry Pump.The outlet position of the pump can be installed and used by rotating eight different angles at 45℃ intervals.

The horizontal Slurry Pump body has a replaceable wear-resistant metal lining, the impeller, sheath, shield and other parts of the flow are wear-resistant metal.In the area with low head and small flow, the slurry with strong abrasion can be transported.Conveying of light abrasive slurry in high lift and large flow area.It is suitable for conveying strong abrasion and high concentration slurry to metallurgical, mining, coal, power, building materials and other industrial sectors.

This type of pump can also be used in series.Packing seal, auxiliary impeller seal, packing and auxiliary impeller seal, mechanical seal, etc.The transmission type is DC direct connection transmission, CR parallel belt transmission, ZVZ up and down belt transmission, CV vertical belt transmission and other types.

The main working parts of the horizontal slurry pump are the impeller and the housing. The impeller device in the housing is located on the shaft and connected with the prime mover to form a whole.When the prime mover drives the impeller to rotate, the blade in the impeller forces the fluid to rotate, that is, the blade does work to the fluid along its motion direction, thus forcing the fluid's pressure potential energy and kinetic energy to increase.At the same time, the fluid in the action of inertia force, from the center to the edge of the impeller flow, and at a very high speed out of the impeller, into the pressure chamber, and then through the diffusion tube discharge, this process is called the process of pressure water.

At the same time, due to the flow of fluid in the center of the impeller edge, the formation of a low pressure area in the center of the impeller, when it has enough vacuum, under the action of the suction end pressure (generally atmospheric pressure), the fluid by suction into the impeller, this process is called the process of water absorption.As a result of the impeller continuous rotation, fluid is also continuous discharge, inhalation, the formation of continuous work.

The working process of horizontal slurry pump is actually a process of energy transfer and transformation.It transfers the mechanical energy of the motor rotating at high speed through the pump blade and converts it into the pressure energy and kinetic energy of the pumped fluid.In the production process, the horizontal slurry pump ACTS as a producer, mixing liquids or solids together to form new materials.

Horizontal gravel pumps, centrifugal gravel pumps made in Shijiazhuang Naipu Pump Co.,ltd. We have many types of Horizontal Slurry Pumps, such as Gravel Pump, grave Sand Pump, horizontal mining slurry pumps.