65QV Underground Mine Water Semi-Submersible Pump
small semi submersible pump, 65qv sump pumps, 65qv vertical pump
Polyurethane Pump Parts, Slurry Pump spares, centrifugal slurry pumps, mining slurry pumps, coal mining slurry pumps
Vertical sump pumps/ centrifugal slurry pumps/ vertical pumps delivering abrasive slurries/ sump pumps/ abrasion-resistant metal sump pumps/ 65qv sump pumps/ 100RV sump pumps/ vertical pumps transporting non-edge angle abrasive slurry.
Naipu® NP-SP pumps are vertical, centrifugal slurry pumps submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps have no need of any shaft seal and sealing water. They can also be operated normally for insufficient suction duties. Wet parts of type NP-SP pump are made of abrasion-resistant metal. All parts of type NP-SP(R) pump immersed in liquid are lined with rubber outer liner. They are suited to transport non-edge angle abrasive slurry.
Advantages:
1. The sump pump body is bolted to the support plate. The Bearing Assembly is designed on the top of the support plate. The physical layout of the submersible sump pump simplifies maintenance operations.
2. Vertical cantilever design eliminates the need of shaft seal or sealing water, the centrifugal sump pump can function property even when there is insufficient slurry getting to the suction side.
3. The open impeller design has vanes on both sides to balance the centrifugal forces to ensure stable operation. Wide flow passage allows large particle and high viscosity slurries to get through.
4. The double screen filters are set at the suction side to stop big particles out of the slurry. Protect pump life time.
Installation Types
DC: The motor mounting base is set above the bearing assembly,so it is easy to replace or repair the motor parts.
BD: A V-belt is used to connect the motor shaft and the pump shaft.The motor support frame is installed above the bearing assembly,allowing easy replacement of grooved wheels.The purpose of swapping grooved wheels is to change the rotary speed of the pump shaft in order to suit varing pumping applications or conform to the worn-down sump pump.
Typical Applications--- Sump drainage washdown Floor drainage Mill sumps Carbon transfer Monitoring Magnetite mixing
NP-SP(R) Sump Pump Showing Component
Vertical sump pumps/ centrifugal slurry pumps/ vertical pumps delivering abrasive slurries/ sump pumps/ abrasion-resistant metal sump pumps/ 65qv sump pumps/ 100RV sump pumps/ vertical pumps transporting non-edge angle abrasive slurry.
Type | Allowable Mating Max. Power(Kw) | Range Of Performance | Impeller |
Capacity/Q | Head/m | Speed/rpm | Max Efficiency/% | No. of Vanes | Impeller Diameter/mm |
m³/hr | L/S |
40PV-NP-SP | 15 | 19.44-43.2 | 5.4-12 | 4.5-28.5 | 1000-2200 | 40 | 5 | 188 |
65QV-NP-SP | 30 | 23.4-111 | 6.5-30.8 | 5-29.5 | 700-1500 | 50 | 5 | 280 |
100RV-NP-SP | 75 | 54-289 | 15-80.3 | 5-35 | 500-1200 | 56 | 5 | 370 |
150SV-NP-SP | 110 | 108-479.16 | 30-133.1 | 8.5-40 | 500-1000 | 52 | 5 | 450 |
200SV-NP-SP | 110 | 189-891 | 152.5-247.5 | 6.5-37 | 400-850 | 64 | 5 | 520 |
250TV-NP-SP | 200 | 261-1089 | 72.5-302.5 | 7.5-33.5 | 400-750 | 60 | 5 | 575 |
300TV-NP-SP | 200 | 288-1267 | 80-352 | 6.5-33 | 350-700 | 50 | 5 | 610 |
Product Overview:
Workshop photos
Shijiazhuang Naipu Pump Co.,Ltd is a professional manufacturer of Slurry Pumps,
We can be in service from Mould, Casting, Heat treatment, Machining, Assembly, Testing etc. one dragon service.
We have our Mould Workshop, there are Wooden Mould, Aluminum Mould, Lost Foam Casting Mould, Wax Mould etc.
Naipu own Casting Workshop, mainly Sand Casting and Lost Foam Casting and Precision Casting.
Naipu own Heat treatment Workshop, after out of furnace, the hardness are according to the technical requirement.
Naipu own Machining Workshop, we are professional from rough machining to finish machining.
Naipu own Assembly Workshop, our mechanicians are skilled in assemblying as we had about 30 years experience in this area.
Naipu own Inspection Workshop, Every order every parts we will do the test before delivery.
Quality Control Plans
As a professional pump manufacturer,we always stick to the principle of technology and quality comes first. At NAIPU PUMP, we strictly adhere to the ISO9001 Standard and CE Certificate and other industry standards as requests.
We set various check points along the whole production line, which throughout Raw Material, Charging Material, Surface and Heat Treatment checking, Material Analysis,Spare Testing and Pump Testing etc.
CONTACT US:
Katherine Hou
SHIJIAZHUANG NAIPU PUMP CO.,LTD
CONTACT PERSON: Katherine
SKYPE: katherine_naipump
+86-15028111051
PLEASE CONTACT ME FREELY IF ANY QUESTIONS.
Disclaimer: Warman, Goulds and Metso and others are the brand names of the respected owners. Any use of competitor names, trademarks, model numbers or part numbers by NaiPu Pump are for reference purpose only and do not imply that any part or pump listed is the product of Weir Warman Pumps, ITT Goulds Pumps and Metso Pumps.