8/6 EG Single Casing River Sand Suction Pump
G series Sand Dredging Pump is a new type of single-stage single-suction cantilever horizontal centrifugal sludge pump researched & manufactured by our company, aiming at dredging and damming of the river and seas.
Horizontal Slurry Pump Strongly wear-resistant casting alloy iron, whose hardness is not less than 58HRC adoped for the casting, impeller, front liner and rear liner of wet parts. It throughout meets requirements of the dredge to dredging pumps.
Horizontal Sand Pump Advantages:
1 | Large drdging depth, high density of dredging mud, good NPSH and stronger suction lift ability |
2 | Strong through-put. The pump can persistently discharge gravel, high plastic soil lump and so on |
3 | The pump can be directly matched with either motor or diesel engine |
4 | Wide application. It can be used in various kinds of soil quality. |
5 | Little hydraulic loss, high efficiency and low oil-consumption |
6 | Little volume, light weight |
7 | Steady operating, little vibration, low noise |
8 | Simple & reliable construction, easily disassembly & assembly, convenient maintaining |
9 | Reliable sealing without leakage |
10 | Long operation life of parts, high reliability of whole set, long MTBF |
11 | Obvious economic efficiency and energy-saving |
NP-G Gravel Sand Horizontal Slurry Pump Performance Parameters
Model | Flow (m3/h) | Head (m) | Speed (r/min) | Efficiency (%) | Motor (kw) | Drive type |
6/4 D-G | 187-36 | 7-51 | 1400-600 | 30-58 | 52-3 | CV.CR.DC |
8/6 E-G | 576-133 | 10-48 | 1400-800 | 60-54 | 88-11 | CV.CR.DC |
10/8 F-G | 930-216 | 11-44 | 940-500 | 65-34 | 147-22 | CR.DC |
12/10 G-G | 1512-360 | 11-58 | 850-400 | 70-50 | 305-24 | CR.DC |
14/12 G-G | 3168-522 | 9.5-66 | 700-300 | 68-60 | 643-29 | CR.DC |
16/14 TU-G | 3024-900 | 14-45 | 500-300 | 70-50 | 459-78 | CR.DC |
8/6 F-GH | 648-126 | 15-77 | 1050-500 | 71-50 | 177-12 | CR.DC |
10/8 F-GH | 1091-324 | 19.2-56.5 | 800-500 | 72-60 | 205-32.4 | CR.DC |
12/10 G-GH | 2232-612 | 28-77 | 700-450 | 73-60 | 558-89 | CR.DC |
16/14 TU-GH | 3450-1000 | 72-25 | 500-300 | 78-65 | 2-8 | CR.DC |
18/16 TU-G | 3600-1050 | 42-12 | 250-450 | 60-72 | 2-8 | CR.DC |
18/16 TU-GH | 4300-1350 | 70-18 | 250-500 | 60-70 | 2.5-8 | CR.DC |
Centrifugal Gravel Pumps Parts
Main Part Number at the Drawing
003: Base 005: Bearing Assembly 132: Intake Joint Discharge Joint 130: Discharge Flange Intake Flange 013: Cover Plate | 131: Bowl 137: Impeller 041: Back Liner 135: Door Clamp Ring 134: Adapter Plate Clamp Ring 124: Volute Cover Seal |
Part Code Numer: E4041A05, EG6124, EG6131A05, EG86013A05, EG86137A05, EG6032MD21, E004MG01, E005M...
Single Stage Sand Pump
Q1. How slurry pump works?
A: HH slurry pumps are those of cantilever, horizontal and centrifugal ones, which are widely used to transport corrosive/ abrasive and high concentration slurry in many industries.
Q2. How to gurantee the quality?
A: All our pump and spare parts pass ISO 9001:2008 and CE certificate. Warranty time is 12 month except Wet End Parts.
Q3. What information should be known if I want to get a quotation?
A: Pump working conditions, Usage , Pump Capacity, pump Head , Slurry SG, The More the Better. Please offer me the type of the used pump that working now.
Q4. Manaufacturer or trader?
A: Manufacturer of couse. Our Factory located in Shijiazhuang, Hebei , China. Welcome to visit.
Q5. Your company product range?
A: Centrifugal Pump, Slurry pump, Sand pump, Gravel Pump, Dredging Pump, Clean Water Pump, Sewage pump, Chemical pump, Single stage pump, Double suction pump, Industry pump, Paper pulp pump, Mud pump, Sludge pump, etc
Q6. Delivery time:
A: For the Common Slurry pump and spare parts , the delivery time within 7-15 days. Special material and OEM production is longer.
Any question please contact Katherine Hou freely.