1.5/1 BA HR Small Slurry Pump for Mining Feeding
Horizontal Slurry Pump / NP-A HR Horizontal Slurry Pump / 1 Inch Rubber Slurry Pump / Open Impeller Pump / Small Rubber Pump / Centrifugal Slurry Pump / 1.5 / 1 B - A HR Slurry Pump
1.5/1 B -A HR Horizontal Slurry Pump
1: Discharge size (inch)
1.5: Suction size (inch)
B: Frame type with maximum power
A HR: High concentration and high abrasive slurry
NPA HR Horizontal Slurry Pump Pump Parts
1. All of the metal wet parts can are made of high chromium alloy which has superior wear and erosion resistance or grey iron which has a high rigidity.
2. As the expeller ring is assembled together with the expeller, much pressure can be reduced effectively for the impeller. Meanwhile, it can still maintain a reliable sealing performance.
3. The parts such as labyrinth, labyrinth locknut, end cover and shaft sleeve are used for Bearing Assembly; these parts can be changed easily and have high accuracy and longer service life.
4. Some fastening parts such as studs and bolts can be used for fixing the other parts securely. All the fastening parts can be attached easily, ensuring the safety.
5. All of the rubber parts have superior erosion resisting performance which can be used for a long life.
1 Inch Rubber Slurry Pump performance parameters
Type | Max power (kw) | Capacity m3/hr | | Speed rpm | Max Efficiency % | | No. of Vanes | |
1.5/1 B-A HR | 15 | 10.8-25.2 | 7-52 | 1400-3400 | 35 | 2-4 | 3 | 152 |
2/1.5 B-A HR | 15 | 25.2-54 | 5.5-41 | 1000-2600 | 50 | 2.5-5 | 5 | 178 |
3/2 C-A HR | 30 | 36-75.6 | 13-39 | 1300-2100 | 55 | 2-4 | 5 | 213 |
4/3 C-A HR | 30 | 79.2-180 | 5-34.5 | 800-1800 | 59 | 3-5 | 5 | 245 |
6/4 D-A HR | 60 | 144-324 | 12-45 | 800-1350 | 65 | 3-5 | 5 | 365 |
8/6 E-A HR | 300 | 324-720 | 7-49 | 400-1000 | 65 | 5-10 | 5 | 510 |
10/8 F-A HR | 560 | 540-1188 | 12-50 | 400-750 | 75 | 4-12 | 5 | 686 |
12/10 ST-A HR | 560 | 720-1620 | 7-45 | 300-650 | 80 | 2.5-7.5 | 5 | 762 |
16/14 TU-A HR | 1200 | 1200-3000 | 11-42 | 250-450 | 82 | 4-9 | 5 | 1067 |
20/18 TU-A HR | 1200 | 1800-4000 | 12-44 | 200-350 | 82 | 5-10 | 5 | 1370 |
1.5/1 BA HR Small Rubber Pump for Mining Feeding
Naipu offering Open Impeller Pump wet end part material as following. Metal MA05, A07, A12, A33, A49, A61 and etc. Rubber R08, R26, R33, NR55, S01, S21, S31, S42 and etc. Special materail: U01, EPDM, PU, CR, Hastelloy 276-C, Ferralium and etc.
Any question please contact Katherine Hou freely. katherine at naipump dot com