10/8F High chrome metal Lined Slurry Pumps For Rugged Tailings,10/8F Horizontal Slurry Pumps
Introduction of 10/8ST 10/8FSlurry Pumps:
10/8F is 8 inch large slurry pumps is the standard parts Naipu can offer. This pump is cheap in cost but weight. 10/8F-AH Horizontal Slurry Pumps it is widely used for heavy duty applications as well.
AH Series Slurry Pump is a horizontal range of High Performance, Rugged and Reliable METAL Lined Slurry and Sludge pumps in 9 standard sizes and numerous material combinations; from standard HIGH CHROME impellers and liners; within ductile iron casings, and also the impellers and rubber can be standard rubber,such as R08,R26 or synthetic rubbers (such as neoprene and hypalon) and polymers (such as urethane).
Typical Applications of 10/8F metal slurry pumps or 10/8F horizontal mining slurry pumps:
Tailings
Heavy Mining
Ash Handling
Cyclone Feeds
Pulp and Paper
Corrosive Slurries
Coal Preparation
Mineral Processing
Aggregate Processing
Heavy Refusal Remova
Components of 10/8F horizontal slurry pumps, 10/8F horizontal mining slurry pumps,10/8ST horizontal slurry pumps:
1)Impeller
The impeller, either elastomer, stainless steel or high-chrome material, is the main rotating component which normally has vanes to impart the centrifugal force to the liquid.
2)Casing
Split outer casing halves of cast contain the wear liners and provide high operation pressure capabilities. The casing shape is generally of semi-volute or concentric, efficiencies of which are less than that of the volute type.
3)Shaft and Bearing Assembly
A large diameter shaft with a short overhang minimizes deflection and vibration. Heavy-duty roller bearing are housed in a removable bearing cartridge.
1. OEM order is accepted
2. We help to select the right pump
3. Interchangeable rubber and metal design
4. Perfect After-sales service and large stock
5. We provide lifetime after sale service