1, check the cable for damage, carefully before trial the fastener is loose or fall off, pump in the process of transport, storage, installation with and without deformation or damage.
2, with 500 v megohmmeter measuring insulation resistance between the same electric pump motor and relatively, the value shall be not less than 2 ohms, or dry processing should be made for motor stator winding, the temperature of the drying process are not allowed to exceed 120 C.
After 3, pump through the rotation of the direction from the inlet rotate counterclockwise (6), if the electric pump reversal, just put the cable in any second thread for connection location.
4, electric pump casing with ground wire must be strictly in accordance with relevant regulations, in order to ensure the personal safety when using, the pumps is running, it is forbidden to install or mobile launching of human beings in near one thousand electric pump in case of leakage accident.Submersible Centrifugal Pump 5, electric pump in the absence of special circumstances must be equipped with automatic Water Pump control, do not hang grid directly or use knife switch to switch on the power supply, ensure the normal operation of centrifugal Submersible Pump. 6, the electric pump must not be long-term running low hm conditions (usually with a head of less than 60% of the rated head), best can control within the scope of the recommended head, in case of electric pump burn out motor due to overload.
7, the circulation cooling device of pump it is forbidden to overall long running out of water, in case of damage to the pumps overheating.
8, the pump equipped with variable frequency speed regulating device, applicable to industrial and mining is more extensive.submersible sand Slurry Pump Use high chromium slag pulp pump flow components, material, wear-resisting performance is good, the flow performance, is the domestic life of the same type pump 2 to 10 times.
ZJQ 200-15-22(JL) submersible slurry pump
ZJQ----submersible slurry pump
200 ----capacity(m³/H)
15----Head(m)
22---motor power(Kw)
J----with agitator
L with cooling Jacket
Submersible Slurry Pump advantage:
1. Submersible work without influence with suction head
2. No assitant of vacuum pump,save you invest
3. No noise,keep the slience of your work station
4. With agitator,more convience for operating.
2. High Chrome Submersible Slurry Pump construction drawing:
3. High Chrome Submersible Slurry Pump ,submersible sand slurry pumpselect chart:
4. Submersible Slurry Pump ,submersible sand slurry pump applications:
5.Application conditions ofHigh Head Submersible Slurry Pumps