20AL Open Impeller Industrial Slurry Pump
Cr26 Corrosion Slurry Pump made in China, Light Duty Sludge Pump produced by naipu pump, Horizontal Slurry Pump installed on the land, NP-L Lower Abrasive Slurry Pump drive by belt and pulley, Small Light A05 Slurry Pump export all over the word. L Lower Abrasive Slurry Pump widely used for many industry. Light duty slurry pump work for minig solid industry using.
20AL Industrial slurry pump part code no.: AL2032G01, AL2013G01, 175056NAA05, AL2110A05, AL2110A05, 175041A05, A075C21, A117C21, ASC078G01, ASC028C01, ASC029G01, A003MG01, A001E05, A063, A118, A067, A315G01, A044G01, A015ME05, A090, A109, AL2060, AL2132, 175125, A108, A004MG01, ASC073ME05, A024, A046, A062, ASC005M...
Small Light A05 Slurry Pump / Cr26 Corrosion Slurry Pump
Wear resistant cast alloys are used for slurry pump liners and impellers where conditions are not suited to rubber, such as with coarse or sharp edged particles, or on duties having high impeller peripheral velocities or high operation temperatures.
Slurry Pump Impeller, slurry pump cover plate,
Centrifugal Slurry Pump, wear resistant slurry pumps. rubber lined slurry pumps.
NP-L Lower Abrasive Slurry Pump Performance Parameters
Type | Max. Power Kw | Clear Water Performance | Impeller | Application |
Capacity m³/hr | Head/m | Speed/rpm | Efficiency % | NPSH m | Nos of Vane | Diameter mm |
20A-L | 7.5 | 2.34-10.8 | 6-37 | 1400-3000 | 30 | 3.5-8 | 4 | 152.4 | -Ball mill discharge |
50B-L | 15 | 16.2-76 | 9-44 | 1400-2800 | 55 | 3.5-8 | 5 | 190 | -Coarse tailings |
75C-L | 30 | 18-151 | 4-45 | 900-2400 | 57 | 3-6 | 4 | 229 | -Rod mill discharge |
100D-L | 60 | 50-252 | 7-46 | 800-1800 | 60 | 2-3.5 | 4 | 305 | -Coal washing |
150E-L | 120 | 115-486 | 12-51.5 | 800-1500 | 65 | 2-6 | 4 | 381 | -Wet crushers |
200E-L | 120 | 234-910 | 9.5-40 | 600-1100 | 64 | 3-6 | 4 | 457 | -Phosphate matrix |
250F-L | 120 | 396-1425 | 8-30 | 500-800 | 77 | 2-10 | 5 | 550 | -Minerals concentrate |
300S-L | 560 | 468-2538 | 8-60 | 400-950 | 79 | 2-10 | 5 | 653 | -Lime grinding |
350S-L | 560 | 650-2800 | 10-59 | 400-840 | 81 | 3-10 | 5 | 736 | -FGD waste water |
400ST-L | 560 | 720-3312 | 7-51 | 300-700 | 80 | 2-10 | 5 | 825 | -Flotation |
450ST-L | 560 | 1008-4356 | 9-48 | 300-600 | 80 | 2-9 | 5 | 933 | -Process chemical |
550TU-L | 1200 | 1980-7900 | 10-50 | 250-475 | 86 | 4-10 | 5 | 1213 | -Pulp and paper |
L Slurry Pump Parts
Light Duty Sludge Pump Main Part Number at the Drawing
032: Frame Plate 060: Intake Joint 132: Discharge Joint 083: Throatbush 110: Volute Liner 147: Impeller | 122: Stuffing Box Seal 036: Frame Plate Liner 013: Cover Plate 018: Cover Plate Liner 124: Volute Liner Seal 041: Frame Plate Liner Insert |
Any question please contact Katherine Hou freely.