Construction design Horizontal Slurry Pump
The frame plates of horizontal slurry pump have changeable, hard metal or rubber liners. The impellers are made of wear-resistant metal or rubber.
The shaft seal of horizontal Slurry Pump could use the packing seal, centrifugal seal.
The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
The pump of this type may be installed in multistage series to meet the delivery for long distance.
2.Advantage of Horizontal slurry pump 1. Advanced water design, reasonable structure design, good cavitation performance, reliable operation etc features , which is used in metallurgy, mine, non-ferrous metal, electricity, coal etc to transport tailings, fine ore, ash, slime, gravel etc strong abrasive and high concentration slurry.
2. Adjusting gap is available. Small gap, high efficiency, less leakage. After a period of running, the impeller and guard plate have some wear, so that the efficiency of pump decrease, but by adjusting the gap between impeller and guard plate the efficiency of pump will reach the highest value again.
3. Product commonality. Our products are all international standard, parts can be interchangable.
4. Wear resistant and anti-corrosive material. Cr28 is a kind of material which is increased some Cr content on the basis of Cr26, and adding a certain amount of Mo,Ni,Ti,W,Cu,Re etc rare metal, thereby hardenability is increased and promote the formation of carbides MoC, the material has a higher wear resistance.
3. Structure of horizontal slurry pump, Mining Slurry Pump
4. Production process of our Vertical Slurry Pump and horizontal slurry pump
5. Package of our vertical slurry pump and horizontal slurry pump