8/6F-AH slurry pump and spare parts

a) The pump frame plates have replaceable wear-resistant metal liners or rubber liners. The impellers are made of wear-resistant metal or rubber.
b) Bearing Assembly use cylindrical structure,adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication.
e) The shaft seal could use the packing seal, expeller seal and mechanical seal.
d) The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
e) There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, frequency conversion drive devices.
f) Wide performance, good NPSH and high efficiency. The pump of this type may be installed in multistage series to meet the delivery for long distance.

Selection Chart

Type	Max Power (Kw)	Clear Water Performance					Impeller
		Capacity /m³/hr	Head /m	Speed/rpm	Max Efficiency /%	NPSH /m	Nos of Vane	Diameter /mm
1.5/1 B-AH	15	12.6-28.8	6-68	1200-3800	40	2-4	5	152
2/1.5 B-AH	15	32.4-72	6-58	1200-3200	45	3.5-8	5	184
3/2 C-AH	30	39.6-86.4	12-64	1300-2700	55	4-6	5	214
4/3 C-AH	30	86.4-198	9-52	1000-2200	71	4-6	5	245
6/4 D-AH	60	162-360	12-56	800-1550	65	5-8	5	365
8/6 E-AH	300	360-828	10-61	500-1140	72	2-9	5	510
10/8 F-AH	560	612-1368	11-61	400-850	71	4-10	5	686
12/10 ST-AH	560	936-1980	7-68	300-800	82	6	5	762
14/12 ST-AH	560	1260-2772	13-63	300-600	77	3-10	5	965
16/14 TU-AH	1200	1368-3060	11-63	250-550	79	4-10	5	1067
20/18 TU-AH	1200	2520-5400	13-57	200-400	85	5-10	5	1370